Specifications

7 - 74 WiNG 5.2.6 Wireless Controller CLI Reference Guide
7.1.21.2.4dot1x
 interface config instance
Configures 802.1X authentication settings
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
dot1x supplicant username <USERNAME> password [0 <WORD>|2 <WORD>|<WORD>]
Parameters
• dot1x suppliant username <USERNAME> password [0 <WORD>|2 <WORD>|<WORD>]
Examples
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#dot1x supplicant username Bob
password motorola
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#show context
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#show context
interface ge1
description This\ is\ GigabitEthernet\ interface\ for\ Royal\ King
dot1x supplicant username Bob password 0 motorola
ip dhcp trust
qos trust dscp
qos trust 802.1p
channel-group 1
rfs7000-37FABE(config-profile-default-RFS7000-if-ge1)#
Related Commands
supplicant username
<USERNAME>
Sets the supplicant’s username for authentication
• <USERNAME> – Specify the username.
password
[0 <WORD>|
2 <WORD>|<WORD>]
Sets the password. Select any one of the following options:
• 0 <WORD> – Sets a clear text password
• 2 <WORD> – Sets an encrypted password
• <WORD> – Specify the password.
no Disables or reverts interface settings to their default