Specifications
7 - 40 WiNG 5.2.6 Wireless Controller CLI Reference Guide
7.1.13.2 isakmp-policy
crypto
Creates a ISAKMP policy and enters its configuration mode. To navigate to the config-isakmp-policy instance, use the
following commands:
rfs7000-37FABE(config-profile-default-RFS7000)#crypto isakmp policy test
rfs7000-37FABE(config-profile-default-RFS7000-isakmp-policy-test)#?
Crypto Isakmp Config commands:
authentication Set authentication method for protection suite
encryption Set encryption algorithm for protection suite
group Set the Diffie-Hellman group
hash Set hash algorithm for protection suite
lifetime Set lifetime for ISAKMP security association
no Negate a command or set its defaults
clrscr Clears the display screen
commit Commit all changes made in this session
end End current mode and change to EXEC mode
exit End current mode and down to previous mode
help Description of the interactive help system
revert Revert changes
service Service Commands
show Show running system information
write Write running configuration to memory or terminal
rfs7000-37FABE(config-profile-default-RFS7000-isakmp-policy-test)#
Table 7.5 summarizes ISAKMP policy configuration commands.
Table 7.5 isakmp-policy mode commands
Command Description Reference
authentication Authenticates RSA pre-share keys page 7-42
encryption Configures encryption level of the data transmitted using the
crypto-isakmp
command
page 7-43
group Specifies Diffie-Hellman group (1 or 2) used by the IKE policy page 7-44
hash Specifies hash algorithm page 7-45
lifetime Specifies how long an IKE SA is valid before it expires page 7-46
no Negates a commnd or sets its default value page 7-47
clrscr Clears the display screen page 5-3
commit Commits (saves) changes made in the current session page 5-4
do Runs commands from EXEC mode page 4-67
end Ends and exits the current mode and moves to the PRIV EXEC mode page 5-5
exit Ends the current mode and moves to the previous mode page 5-6
help Displays the interactive help system page 5-7
revert Reverts changes to their last saved configuration page 5-13
service Invokes service commands to troubleshoot or debug
(config-if) instance
configurations
page 5-14