Specifications

5 - 14 WiNG 5.2.6 Wireless Controller CLI Reference Guide
5.1.8 service
common commands
Service commands are used to view and manage wireless controller configurations in all modes. The service commands
and their corresponding parameters vary from mode to mode. The User Exec Mode and Priv Exec Mode commands provide
same functionalities with a few minor changes. The Global Config service command sets the size of history files. It also
enables viewing of CLI tree of the current mode.
This service command section is organized as follows:
(User Exec Mode)
(Privilege Exec Mode)
(Global Config Mode)
Supported in the following platforms:
Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP6532, AP71XX, AP81XX
Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax (User Exec Mode)
service
service [advanced-wips|ap300|clear|cli-tables-expand|cli-tables-skin|cluster|
delete-offline-aps|force-send-config|load-balancing|locator|radio|radius|
set|show|smart-rf|ssm|wireless]
service advanced-wips [clear-event-history|terminate-device <MAC>]
service advanced-wips clear-event-history {accidental-association|
crackable-wep-iv-used|dos-cts-flood|dos-deauthentication-detection|
dos-disassociation-detection|dos-eap-failure-spoof|dos-eapol-logoff-storm|
dos-rts-flood|essid-jack-attack-detected|fake-dhcp-server-detected|
fata-jack-detected|id-theft-eapol-success-spoof-detected|
id-theft-out-of-sequence|invalid-channel-advertized|invalid-management-frame|
ipx-detection|monkey-jack-attack-detected|multicast-all-routers-on-subnet|
multicast-all-systems-on-subnet|multicast-dhcp-server-relay-agent|
multicast-hsrp-agent|multicast-igmp-detection|multicast-igrp-routers-detection|
multicast-ospf-all-routers-detection|multicast-ospf-designated-routers-detection|
multicast-rip2-routers-detection|multicast-vrrp-agent|netbios-detection|
null-probe-response-detected|probe-response-flood|rogue-ap-detection|
stp-detection|unauthorized-bridge|windows-zero-config-memory-leak|
wlan-jack-attack-detected}
service ap300 [dns-name|dot1x|locator|reload]
service ap300 dot1x username <USERNAME> password <PASSWORD> on [all|ap-mac <MAC>]
service ap300 dns-name <DNS> on [all|ap-mac <MAC>]
service ap300 [locator|reload] <MAC>
service clear [ap-upgrade|command-history|noc|reboot-history|unsanctioned|
upgrade-history|wireless|xpath]
service clear ap-ugrade history {on <DOMAIN-NAME>}
service clear [command-history|reboot-history|upgrade-history]{on <DEVICE-NAME>}
service clear noc statistics
service clear unsanctioned aps {on <DEVICE-OR-DOMAIN-NAME>}
service clear xpath requests {<1-100000>}
service clear wireless [ap|client|radio|wlan]
service clear wireless [ap|client] statistics {<MAC>} {(on <DEVICE-OR-DOMAIN-
NAME>)}
service clear wireless radio statistics {<MAC/HOSTNAME>} {<1-3>} {(on <DEVICE-OR-
DOMAIN-NAME>)}
service clear wireless wlan statistics {<WLAN>} {(on <DEVICE-OR-DOMAIN-NAME)}
service cli-tables-expand {left|right}
service cli-tables-skin [ansi|hashes|minimal|none|percent|stars|thick|thin|utf-8]
{grid}