Specifications

GLOBAL CONFIGURATION COMMANDS 4 - 175
• keberos server timeout <1-60>
Examples
rfs7000-37FABE(config-wlan-wlan1)#kerberos server timeout 12
rfs7000-37FABE(config-wlan-wlan1)#kerberos server primary host 172.16.10.9 port
88
rfs7000-37FABE(config-wlan-wlan1)#show context
wlan wlan1
description testwlan
ssid wlan1
bridging-mode local
encryption-type tkip-ccmp
authentication-type eap
802.11w sa-query timeout 110
802.11w sa-query attempts 1
kerberos server timeout 12
kerberos server primary host 172.16.10.9
accounting syslog host 172.16.10.12 port 2
data-rates 2.4GHz gn
client-load-balancing probe-req-intvl 5ghz 5
client-load-balancing band-discovery-intvl 2
captive-portal-enforcement fall-back
ip dhcp trust
acl exceed-rate wireless-client-denied-traffic 20 disassociate
enforce-dhcp
broadcast-dhcp validate-offer
rfs7000-37FABE(config-wlan-wlan1)#
kerberos Configures a WLAN’s Kerberos authentication parameters
The parameters are: password, realm, and server.
timeout <1-60> Modifies the Kerberos KDC server‘s timeout parameters
• <1-60> – Specifies the time the wireless controller waits for a response from the Kerberos
KDC server before retrying. Specify a value from 1 - 60 seconds.