Specifications

4 - 158 WiNG 5.2.6 Wireless Controller CLI Reference Guide
4.1.49.2.6 broadcast-dhcp
 wlan-mode-commands
Configures the broadcast DHCP packet handling parameters
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
broadcast-dhcp validate-offer
Parameters
• broadcast-dhcp validate-offer
Examples
rfs7000-37FABE(config-wlan-wlan1)#broadcast-dhcp validate-offer
rfs7000-37FABE(config-wlan-wlan1)#show context
wlan wlan1
ssid wlan1
bridging-mode local
encryption-type none
authentication-type eap
802.11w sa-query timeout 110
802.11w sa-query attempts 1
accounting syslog host 172.16.10.12 port 2
acl exceed-rate wireless-client-denied-traffic 20 disassociate
broadcast-dhcp validate-offer
rfs7000-37FABE(config-wlan-wlan1)#
validate-offer Validates the broadcast DHCP packet destination (a wireless client associated to the radio)
before forwarding over the air