Specifications

GLOBAL CONFIGURATION COMMANDS 4 - 11
4.1.6 ap622
 global config mode commands
Adds a AP622 access point to the wireless controller managed network. If a profile for the AP is not available, a new profile
is created.
Supported in the following platforms:
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
ap622 <MAC>
Parameters
• ap622 <MAC>
Examples
rfs7000-37FABE(config)#AP622 11-22-33-44-55-66 ?
rfs7000-37FABE(config-device-11-22-33-44-55-66)#
Related Commands
<MAC> Specify the MAC address of the AP622.
no Resets values or disables commands