User guide

SECTION 3 CONFIGURATION
3-4 SECTION 3, CONFIGURATION
Field or Button Description
Channel Number Identifies the channel on which the AP
communicates. Each wireless client must use
the same channel to enable communication.
This can only be altered from a PC that is wired
directly to the AP, not wirelessly. For an Ad-hoc
network, select a channel to broadcast.
The default is Channel 11.
Operation Mode Enables you to select the type of transmission
protocol your wireless network uses. The
default is 802.11b/g
The options are:
! Compatibility (802.11b/g)
! Performance (802.11g only)
! Legacy (802.11b only)
Wireless MAC
Address
Displays the MAC address of the unit.