User guide

INSTALLATION SECTION 2
SECTION 2, INSTALLATION 2-9
Configure Your Computers
For initial configuration, you need to initially configure the PC’s
network setting to specify a static IP address for the computer that is
going to “talk” to the Ethernet Bridge.
After initial configuration:
If using DHCP Reconfigure the PC’s settings to Obtain an IP
address automatically.
If not using DHCP
Continue to use the Static IP settings.
This section includes information on configuring computers with the
following operating systems:
! Windows 98SE
! Windows ME
! Windows 2000
! Windows XP
Determine the operating system for each computer you are including
in your wireless network and follow the steps to configure the network
settings for that PC.