Voice Gateway User Guide

VT2142 Voice Gateway User Guide 54
Overview Installation Troubleshooting Contact FAQ Glossary License
Configuration: Basic Advanced TCP/IP
6 Click Protocol and click Add. The Select Network Protocol window is displayed:
7 Click Microsoft in the Manufacturers section and click TCP/IP in the Network Protocols section.
8 Click OK.
9 Click TCP/IP on the Network window. If there is more than one TCP/IP entry, choose the one for the Ethernet
card connected to the VT2142.
10 Click Properties. The TCP/IP Properties window is displayed:
11 Click the IP Address tab.
12 Click Obtain an IP address automatically.
13 Click OK to accept the TCP/IP settings.
14 Click OK to close the Network window.
15 Click OK when prompted to restart the computer and click OK again.
When you complete TCP/IP configuration, go to “Verifying the IP Address in Windows 98 or Windows Me” on
page 62.