Specifications

Configuring Asynchronous Lines and Interfaces
Configuration Examples for Asynchronous Interfaces and Lines
DC-43
Cisco IOS Dial Technologies Configuration Guide
IGRP Configuration Example
In the following example, only the Interior Gateway Routing Protocol (IGRP) TCP/IP routing protocol
is running; it is assumed that the systems that are dialing in to use routing will either support IGRP or
have some other method (for example, a static default route) of determining that the router is the best
place to send most of its packets.
router igrp 111
network 10.11.12.0
interface ethernet 0
ip address 10.11.12.92 255.255.255.0
!
interface async 1
async default ip address 10.11.12.96
async dynamic routing
ip tcp header-compression passive
ip unnumbered ethernet 0
line 1
modem ri-is-cd