Specifications

DC-18
Cisco IOS Dial Technologies Configuration Guide
Configuring Asynchronous Lines and Interfaces
This chapter describes how to configure asynchronous line features in the following main sections:
• How to Configure Asynchronous Interfaces and Lines
• How to Configure Other Asynchronous Line and Interface Features
• Configuration Examples for Asynchronous Interfaces and Lines
Perform these tasks, as required, for your particular network.
To identify the hardware platform or software image information associated with a feature, use the
Feature Navigator on Cisco.com to search for information about the feature or refer to the software
release notes for a specific release. For more information, see the “Identifying Supported Platforms”
section in the “Using Cisco IOS Software” chapter.
For a complete description of the commands in this chapter, refer to the Cisco IOS Dial Technologies
Command Reference. To locate documentation of other commands that appear in this chapter, use the
command reference master index or search online.
How to Configure Asynchronous Interfaces and Lines
To configure an asynchronous interface, perform the tasks described in the following sections as
required:
• Configuring a Typical Asynchronous Interface (As required)
• Creating a Group Asynchronous Interface (As required)
• Configuring Asynchronous Rotary Line Queueing (As required)
• Configuring Autoselect (As required)