Specifications

Contents
v
How to Configure Other Asynchronous Line and Interface Features DC-28
Configuring the Auxiliary (AUX) Port DC-28
Establishing and Controlling the EXEC Process DC-29
Enabling Routing on Asynchronous Interfaces DC-30
Configuring Dedicated or Interactive PPP and SLIP Sessions DC-30
Conserving Network Addresses DC-31
Using Advanced Addressing Methods for Remote Devices DC-32
Assigning a Default Asynchronous Address DC-32
Allowing an Asynchronous Address to Be Assigned Dynamically DC-32
Optimizing Available Bandwidth DC-33
Configuring Header Compression DC-33
Forcing Header Compression at the EXEC Level DC-34
Configuration Examples for Asynchronous Interfaces and Lines DC-34
Interface and Line Configuration Examples DC-35
Asynchronous Interface Backup DDR Configuration Example DC-35
Passive Header Compression and Default Address Example DC-35
High-Density Dial-In Solution Using Autoselect and EXEC Control Example DC-35
Asynchronous Line Backup DDR Configuration Example DC-36
Line AUX Configuration Example DC-36
Rotary Group Examples DC-36
Dedicated Asynchronous Interface Configuration Example DC-37
Access Restriction on the Asynchronous Interface Example DC-37
Group and Member Asynchronous Interface Examples DC-37
Asynchronous Group Interface Examples DC-38
Modem Asynchronous Group Example DC-38
High-Density Dial-In Solution Using an Asynchronous Group DC-39
Asynchronous Interface Address Pool Examples DC-39
DHCP Pooling Example DC-39
Local Pooling Example DC-39
Configuring Specific IP Addresses for an Interface DC-40
IP and SLIP Using an Asynchronous Interface Example DC-40
IP and PPP Asynchronous Interface Configuration Example DC-40
Asynchronous Routing and Dynamic Addressing Configuration Example DC-41
TCP Header Compression Configuration Example DC-41
Network Address Conservation Using the ip unnumbered Command Example DC-41
Asynchronous Interface As the Only Network Interface Example DC-42
Routing on a Dedicated Dial-In Router Example DC-42
IGRP Configuration Example DC-43