Specifications

Sample Modem Scripts
DC-846
Cisco IOS Dial Technologies Configuration Guide: Dial Access
Table 52 contains a legend of symbols used in Table 50 and Table 51.
Sample Modem Scripts
The following are several modem command strings that are appropriate for use with your access server
or router. For use with the access server, Speed=xxxxxx is a suggested value only. Set the DTE speed
of the modem to its maximum capability. By making a reverse Telnet connection in the EXEC mode to
the port on the access server where the modem is connected, then sending an at command followed by
a carriage return.
In the following example, the modem is attached to asynchronous interface 2 on the access server. The
IP address indicated as the server-ip-address is the IP address of the Ethernet 0 interface. The
administrator connects from the EXEC to asynchronous interface 2, which has its IP address assigned
from Ethernet 0.
2511> telnet server-ip-address port-number
192.156.154.42 2002
AST Premium Exec Internal Data/Fax (MNP 5)
Init=AT&F&C1&D3\G0\J0\N3\Q2S7=60S0=1&W
Speed=9600
ATi 9600etc/e (V.42bis)
Init=AT&FW2&B1&C1&D3&K3&Q6&U1S7=60S0=1&W
Speed=38400
AT&T Paradyne KeepInTouch Card Modem (V.42bis)
Init=AT&FX6&C1&D3\N7\Q2%C1S7=60S0=1&w
Speed=57600
Intel
External
E0 Q1 *NA* &W
Practical
Peripherals
E0 Q1 *NA* &W Based on PC288LCD. May vary.
Table 51 AUX and Platform Specific Settings (continued)
Modem
Settings for Use
with AUX Port Other Settings
CommentsNo Echo No Res CAB-MDCE
Write
Memory
Table 52 Legend to Symbols Used in Modem Chart
Symbol Meaning
*NA* This option is not available on the noted modem.
--> The command noted on the right will handle that function.
<-- The command noted on the left will handle that function.
AUX port These parameters are only required for pre-9.21 AUX ports or any other port without
modem control set.