Specifications

Configuring Resource Pool Management
Verifying RPM Components
DC-739
Cisco IOS Dial Technologies Configuration Guide
Verifying Call Counters for a DNIS Group
The following output from the show dialer dnis command shows the call counters for a given DNIS
group. These counters include historical data and can be cleared.
Router# show dialer dnis group ACME_dnis_numbers
DNIS Number:301001
11 total connections
5 peak connections
0 calltype mismatches
Verifying Call Counters for a VPDN Profile
The following output from the show resource-pool vpdn command shows the call counters for a given
VPDN profile or the tunnel information for a given VPDN group. These counters include historical data
and can be cleared.
Router# show resource-pool vpdn profile ACME_VPDN
2 active connections
2 max number of simultaneous connections
0 calls rejected due to profile limits
0 calls rejected due to resource unavailable
0 overflow connections
0 overflow states entered
0 overflow connections rejected
215 minutes since last clear command
Router# show resource-pool vpdn group outgoing-2
VPDN Group outgoing-2 found under VPDN Profiles: ACME_VPDN
Tunnel (L2F)
------
dnis:301001
dnis:ACME_dnis_numbers
Endpoint Session Limit Priority Active Sessions Status Reserved Sessions
-------- ------------- -------- --------------- ------ -----------------
172.16.1.9 * 1 2 OK -
-------- ------------- --------------- -----------------
Total * 2 0
Verifying Load Sharing and Backup
The following example from the show running-config EXEC command shows two different VPDN
customer groups:
Router# show running-config
Building configuration...
.
.
.
vpdn-group customer1-vpdng
request dialin
protocol l2f
domain cisco.com