Specifications

Configuring Resource Pool Management
How to Configure RPM
DC-721
Cisco IOS Dial Technologies Configuration Guide
Additional Information About Cisco RPM
For more information about Cisco RPM, see the following documents:
• AAA Server Group
• Cisco Access VPN Solutions Using Tunneling Technology
• Cisco AS5200 Universal Access Server Software Configuration Guide
• Cisco AS5300 Software Configuration Guide
• Cisco AS5800 Access Server Software ICG
• Cisco Resource Pool Manager Server Configuration Guide
• Cisco Resource Pool Manager Server Installation Guide
• Cisco Resource Pool Manager Server Solutions Guide
• Dial Solutions Quick Configuration Guide
• RADIUS Multiple UDP Ports Support
• Redundant Link Manager
• Release Notes for Cisco Resource Pool Manager Server Release 1.0
• Resource Pool Management
• Resource Pool Management with Direct Remote Services
• Resource Pool Manager Customer Profile Template
• Selecting AAA Server Groups Based on DNIS
• SS7 Continuity Testing for Network Access Servers
• SS7 Dial Solution System Integration
How to Configure RPM
Read and comply with the following restrictions and prerequisites before beginning RPM configuration:
• RPM is supported on Cisco AS5300, Cisco AS5400, and Cisco AS5800 Universal Access Servers
• Modem pooling and RPM are not compatible.
• The Cisco RPM CLID/DNIS Call Discriminator Feature must have Cisco RPM configured.
• CLID screening is not available to channel-associated signaling (CAS) interrupt level calls.
• Cisco RPM requires the NPE 300 processor when implemented on the Cisco AS5800.
• For Cisco AS5200 and Cisco AS5300 access servers, Cisco IOS Release 12.0(4)XI1 or later releases
must be running on the NAS.
• For Cisco AS5800, Cisco IOS Release 12.0(5)T or later releases must be running on the NAS.
• A minimum of 64 MB must be available on the DMM cards.
• The RPM application requires an NPE 300.
• For call discriminator profiles, the Cisco AS5300, Cisco AS5400, or Cisco AS5800 Universal
Access Servers require a minimum of 16 MB Flash memory and 128 MB DRAM memory, and need
to be configured for VoIP as an H.323-compliant gateway.
The following tasks must be performed before configuring RPM: