Specifications

Configuring Resource Pool Management
RPM Overview
DC-710
Cisco IOS Dial Technologies Configuration Guide
If a VPDN group is found within the customer profile, the VPDN group data is used to build a VPDN
tunnel, as follows:
• If the VPDN group limits (number of multilink bundles, number of links per bundle) have not been
exceeded, a VPDN tunnel is built.
• If the limits have been reached, the call is disconnected.
If no VPDN profile is assigned to the customer profile and VPDN is enabled, non-RPM VPDN service
is attempted. If the attempt fails, the call is processed as a retail dial service call if local AAA service is
available.
Accounting Data
You can generate accounting data for network dial service usage in NAS AAA attribute format.
You can configure the Cisco NAS to generate AAA accounting records for access to external AAA server
option. The accounting start and stop records in AAA attribute format are sent to the external AAA
server using either RADIUS server hosts or TACACS+ protocols for accounting data storage. Table 43
lists the new fields in the AAA accounting packets.
Data over Voice Bearer Services
DoVBS is a dial service that uses a customer profile and an associated resource group of digital resources
to direct data calls with a speech call type to HDLC controllers.
To support ISDN DoVBS, use a DNIS group and a configured customer profile to direct the speech call
to the appropriate digital resource.
The resource group assigned to this customer profile will be “digital resources” and will also have a call
type of speech, so the call will terminate on an HDLC controller rather than a modem.
Table 43 AAA Accounting Records
Accounting Start Record Accounting Stop Record
Call-Type
CAS-Group-Name
Customer-Profile-Name
Customer-Profile-Active-Sessions
DNIS-Group-Name
Overflow
MLP-Session_ID
Modem-Speed-Receive
Modem-Speed-Transmit
VPDN-Domain-Name
VPDN-Tunnel-ID
VPDN-HomeGateway
VPDN-Group-Active-Sessions
Disconnect-Cause
Modem-Speed-Receive
Modem-Speed-Transmit
MLP-Session-ID