Specifications

Configuring per-User Configuration
Configuration Examples for Per-User Configuration
DC-699
Cisco IOS Dial Technologies Configuration Guide
interface Serial1
no ip address
encapsulation ppp
ipx ipxwan 0 unnumbered peer-Router1
clockrate 4000000
!
ipx sap 444 ZEON-4 30.0000.0000.0001 444 10
ipx sap 555 ZEON-5 30.0000.0000.0001 555 10
ipx sap 666 ZEON-6 30.0000.0000.0001 666 10
!
...
version 12.1
service timestamps debug uptime
!
hostname Router2
!
aaa new-model
aaa authentication ppp default radius
aaa authorization network radius
enable password lab
!
username Router1 password 7 044C0E0A0C2E414B
ip host Router2 172.21.114.133
ip name-server 172.22.30.32
ip name-server 192.168.2.132
ipx routing 0000.0c47.12d3
ipx internal-network 40
!
interface Ethernet0
ip address 172.21.114.133 255.255.255.224
!
interface Virtual-Template1
no ip address
ipx ipxwan 0 unnumbered nas-Router2
no cdp enable
!
interface Serial1
ip unnumbered Ethernet0
encapsulation ppp
ipx ipxwan 0 unnumbered nas-Router2
ppp authentication chap
!
ipx sap 333 DEEP9 40.0000.0000.0001 999 10
!
virtual-profile vtemplate 1
radius-server host 172.21.114.130
radius-server key rad123
RADIUS debug Output
radrecv: Request from host ac157285 code=1, id=23, length=67
Client-Id = 172.21.114.133
Client-Port-Id = 1399128065
User-Name = “Router1”
CHAP-Password = “%”(\012I$\262\352\031\276\024\302\277\225\347z\274”
User-Service-Type = Framed-User
Framed-Protocol = PPP
Sending Ack of id 23 to ac157285 (172.21.114.133)
User-Service-Type = Framed-User
Framed-Protocol = PPP
[Vendor 9] cisco-avpair = “ipx:sap=101 CYBER-01 40.0000.0000.0001 400 10”
[Vendor 9] cisco-avpair = “ipx:sap=202 CYBER-02 40.0000.0000.0001 401 10”
[Vendor 9] cisco-avpair = “ipx:sap=303 CYBER-03 40.0000.0000.0001 402 10”
[Vendor 9] cisco-avpair = “ipx:sap-fltr-out#20=deny1 40 101”