Specifications

Configuring per-User Configuration
Configuration Examples for Per-User Configuration
DC-694
Cisco IOS Dial Technologies Configuration Guide
!
ip default-gateway 172.21.114.129
no ip classless
ip route 172.21.0.0 255.255.0.0 BRI0
dialer-list 1 protocol ip permit
!
line con 0
exec-timeout 0 0
line vty 0 4
password lab
login
!
end
Output of ping Command from Router1
Router1# ping 172.21.114.132
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.21.114.132, timeout is 2 seconds:
U.U.U
Success rate is 0 percent (0/5)
(fails due to access list deny)
RADIUS Debug Output
radrecv: Request from host ac157284 code=1, id=46, length=67
Client-Id = 172.21.114.132
Client-Port-Id = 1112670208
User-Name = “Router1”
CHAP-Password = “\037\317\213\326*\236)#+\266\243\255x\331\370v\334”
User-Service-Type = Framed-User
Framed-Protocol = PPP
Sending Ack of id 46 to ac157284 (172.21.114.132)
User-Service-Type = Framed-User
Framed-Protocol = PPP
[Vendor 9] cisco-avpair = “ip:route=10.0.0.0 255.0.0.0”
[Vendor 9] cisco-avpair = “ip:route=10.1.0.0 255.0.0.0”
[Vendor 9] cisco-avpair = “ip:route=10.2.0.0 255.0.0.0”
[Vendor 9] cisco-avpair = “ip:inacl#5=deny 10.0.0.1”
Network Access Server (Router2) show and debug Command Output
Router2# show debug
General OS:
AAA Authorization debugging is on
PPP:
PPP authentication debugging is on
Multilink activity debugging is on
ISDN:
ISDN events debugging is on
Dial on demand:
Dial on demand events debugging is on
VTEMPLATE:
Virtual Template debugging is on
pr 4 08:30:09: ISDN BR0: received HOST_INCOMING_CALL
Bearer Capability i = 0x080010
*Apr 4 08:30:09: -------------------
Channel ID i = 0x0101
*Apr 4 08:30:09: IE out of order or end of ‘private’ IEs --
Bearer Capability i = 0x8890