Specifications

Contents
xiii
Configuration Examples for RCAPI DC-247
SIGNALING CONFIGURATION
Configuring ISDN PRI
DC-252
Signaling Overview DC-253
In-Band and Out-of-Band Signaling DC-253
Channelized E1 and T1 on Cisco Devices DC-253
How to Configure ISDN PRI DC-254
Requesting PRI Line and Switch Configuration from a Telco Service Provider DC-254
Configuring Channelized E1 ISDN PRI DC-255
Configuring Channelized T1 ISDN PRI DC-256
Configuring the Serial Interface DC-257
Specifying an IP Address for the Interface DC-258
Configuring Encapsulation on ISDN PRI DC-258
Configuring Network Addressing DC-260
Configuring ISDN Calling Number Identification DC-261
Overriding the Default TEI Value DC-261
Configuring a Static TEI DC-261
Configuring Incoming ISDN Modem Calls DC-261
Filtering Incoming ISDN Calls DC-262
Configuring the ISDN Guard Timer DC-263
Configuring Inclusion of the Sending Complete Information Element DC-263
Configuring ISDN PRI B-Channel Busyout DC-264
Configuring NSF Call-by-Call Support DC-264
Configuring Multiple ISDN Switch Types DC-265
Configuring B Channel Outgoing Call Order DC-267
Performing Configuration Self-Tests DC-267
Monitoring and Maintaining ISDN PRI Interfaces DC-268
How to Configure Robbed-Bit Signaling for Analog Calls over T1 Lines DC-268
How to Configure CAS DC-270
CAS on Channelized E1 DC-270
Configuring CAS for Analog Calls over E1 Lines DC-271
Configuring CAS on a Cisco Router Connected to a PBX or PSTN DC-271
CAS on T1 Voice Channels DC-272
Configuring ANI/DNIS Delimiters for CAS Calls on CT1 DC-272
How to Configure Switched 56K Digital Dial-In over Channelized T1 and Robbed-Bit Signaling DC-273
Switched 56K Scenarios DC-274
Switched 56K and Analog Modem Calls into T1 CAS DC-274