Specifications

Configuring and Managing Integrated Modems
Managing Modems
DC-73
Cisco IOS Dial Technologies Configuration Guide
clear spe Reboots all specified SPEs. All calls
will be torn down.
none
clear spe counters Clears all statistics. clear modem counters
clear spe log Clears all log entries for specified SPEs. clear modem log
show port config Displays configuration parameters for
the current active session.
show modem config
show port modem calltracker Displays port-level information for an
active modem.
show modem calltracker
show port modem log Displays the events generated by the
modem sessions.
show modem log
show port modem test Displays port modem test results. show modem test
show port operational-status Displays statistics for the current active
session.
show modem operational-status
show spe Displays the SPE status. —
show spe log Displays the SPE system log. —
show spe modem active Displays the statistics of all active calls
on specified SPEs.
show modem
show spe modem csr Displays the call success rate (CSR) for
the specified SPE.
show modem
show spe modem disconnect-reason Displays all modem disconnect reasons
for the specified SPEs.
show modem call-stats
show spe modem high speed Displays the total number of
connections negotiated within each
modulation or coder-decoder (codec)
for a specific range of SPEs.
show modem speed
show spe modem high standard Displays the total number of
connections negotiated within each high
modulation or codec for a specific range
of SPEs or for all the SPEs.
—
show spe modem low speed Displays the connect-speeds negotiated
within each low-speed modulation or
codec for a specific range of SPEs or for
all the SPEs.
show modem speed
show spe modem low standard Displays the total number of
connections negotiated within each low
modulation or codec for a specific range
of SPEs or for all the SPEs.
—
show spe modem summary Displays the modem service history
statistics for specific SPEs.
show modem
show spe version Displays all MICA and NextPort
firmware versions stored in flash
memory and the firmware assigned to
each SPE.
show modem mapping
Table 7 EXEC Commands: NextPort to MICA Command Comparison (continued)
NextPort SPE Commands Purpose MICA Modem Commands