Specifications

3-2 800 MHz System Planner R4-11-4G
Four other features are used in the decision charts to help with
understanding relationships between products:
• The use of gray
AND bars (soft ANDs) means that the items to the right of
the bar are not needed for system operation. These items provide
additional capability or functionality (fig. 3-2).
• The use of boxes with rounded corners means that the model number
inside is control or application software. The model number inside is
required for proper system operation (fig. 3-2).
• The use of open-ended overlap boxes to the right or left side of the larger
boxes lists a cable or interface that might be required (fig. 3-3).
• The use of open-ended overlap boxes on the bottom of the larger boxes
lists requirements for the model in the box being overlapped (fig. 3-3).
Figure 3-2. Gray AND Bar
Figure 3-3. Overlays
Soft AND
AND
AND
Hardware
Model
Software
Model
Required
Not Required
Option 1
Option 2
Required Option
Main Model
Number