Specifications

FIXED-END EQUIPMENT
QUANTAR Data Base Station
R4-11-4G Wireless Data Communications Network 1-15
FullVision INM offers the following features:
• System administration
• Topology maps
•Fault management
• Configuration management
• Performance management
• Performance monitoring and analysis
• Enhanced alarms and statistics
• Configurable polling
• Hewlett-Packard
® hardware platform evolution
• HP® NetView software platform evolution
• Device test status and management
For more detailed information of the above features, see the Network
Capabilities Specification and FullVision Integrated Network Manager Installation
and User’s Manual.
1.4.4 QUANTAR Data Base Station
The base site product used at all Private DataTAC base station site is the
QUANTAR DBS. This product is based on the Motorola QUANTAR
platform and has additional embedded software that provides the functions
required by the Private DataTAC network. QUANTAR is described in two
categories as follows:
• QUANTAR Configurations
• QUANTAR Functions
1.4.4.1 QUANTAR Configurations
The DBS consists of a 30-inch cabinet with a power supply and ventilation
equipment. The DBS requires 12-rack units allowing for two-rack units
above and below the lease-line modem.
The QUANTAR platform is a microprocessor-controlled, single channel, full-
duplex base station package. The QUANTAR design includes an extremely
sensitive receiver to maximize radio coverage. The DBS is available in the
800 MHz band with radio power options of 20 and 100 watts. The DBS
supports both RD-LAP 9.6 (821-824 MHz) and RD-LAP 19.2
(806-821 MHz) radio protocols.
The DBS is available in a variety of input power configurations including 110
and 220V AC and 12, 24, 48, and 60V DC, and a combination whereby 12V
DC is used as a backup to failure of the 110V or 220V AC supply.