Specifications

4-40 800 MHz System Planner R4-11-4G
PORTABLE EQUIPMENT
Portable Radio Modem 660
4.4.1.2 Accessories for PRM 660
Table 4-35 lists the accessories for the PRM 660 and equivalent option
numbers, if applicable.
Table 4-35. Hardware Accessories for PRM 660
COF DESCRIPTION
ACCESS.
NUMBER
DESCRIPTION
CABLE, 3FT RJ45TO
DB9-F
FKN4088 Adds a 3-foot RS-232 serial cable with a DB-9 female
connection on one end, and an 8-pin connector (RJ-45) at
the other end. This cable is for connecting the PRM 660 to a
personal computer or other suitable DTE device.
CABLE ANTENNA SMB
TO MINI UHF
FKN4399A Adds required external antenna adapter cable to connect the
PRM 660 to external antennas that are terminated with mini-
UHF connectors.
CHARGER SMART US
CANADA
FLN2325A Adds a smart charger that plugs into a 110V AC wall outlet to
charge the PRM 660 internal battery. This charger has a
conditioning function that gets extended life out of NiCd
chemistry batteries.
CHARGER BATTERY
COND 220VAC EUROPE
FLN2326 Adds a smart charger that plugs into a 220V AC wall outlet to
charge the PRM 660 internal battery. This charger has a
conditioning function that gets extended life out of NiCd
chemistry batteries.
SMART CHARGER FOR
UK
FLN2327 Adds a smart charger that plugs into a 220V AC wall outlet to
charge the PRM 660 internal battery. This charger has a
conditioning function that gets extended life out of NiCd
chemistry batteries.
115 AC WALL ADAPT
FOR U S CAN
FLN6794A Adds a 115V AC wall transformer (V466) used to charge the
battery in the PRM 660.
220-240V AC WALL
ADAPT FOR EUR
FLN6795A Adds a 220V AC wall transformer (V327) used to charge the
battery in the PRM 660.
LEATHERETTE CASE FLN6832A Adds a leather-type carrying case (V465) to protect the PRM
660.
BATTERY 650MAH 7.5V
NICAD
FLN6840A Adds a spare battery pack (V328) of 7.5 NiCd batteries
(V328) that can be charged while installed in the PRM 660.
CASE SWIVEL BELT
LOOP
FLN8315A Adds a flexible nylon holder (V177) for the PRM 660 and can
be swiveled up from the belt position.
BATTERY COVER FLN8386A Adds a spare battery cover for the FLN8387A battery.
BATTERY, 1400MAH FLN8387A Adds a spare 1400 mAh high capacity battery that can be
charged while installed in the PRM 660.
ADAPTER WALL 220-240
50HZ AC UK
FLN8479A Adds a 220V AC, 50 Hz wall transformer (V349), used to
charge the battery in the PRM 660.
120 VOLT 3 HR
DESKTOP CHARGER
HTN9026 R Adds a 120 volt 3 or 16-hour desktop charger that charges
the standard 650 mAh NiCd battery.
MULTI UNIT CHARGER HTN9295 Adds a multi-unit charger holder.
ADAPTER DB9F-DB25M MDKN4023 Adds a DB9-F to a DB25 male adapter when the DTE has a
DB25 male serial port.