Specifications

FIXED NETWORK EQUIPMENT
QUANTAR® Data Base Station Equipment
R4-11-4G Equipment Descriptions 4-21
Tables 4-17 and 4-18 list the hardware and surge protection accessories for
the QUANTAR DBS.
NOTE
Every station must be protected from electrical
surges that can take it out of service. Antenna
lightning arrestors typically are installed with the
transmission line. The design and installation by
area systems engineering follow commonly
accepted practices. Table 4-18 lists the
recommended surge protectors for AC power and
telco or short haul data and control lines.
Table 4-17. Hardware Accessories for QUANTAR DBS
COF DESCRIPTION
ACCESS.
NUMBER
DESCRIPTION
DC-POWER MODEM
(DOMESTICS)
DLN1085 Adds a stand-alone 12V DC modem and is configured to run
14.4 kbps for the RD-LAP 19.2 RF protocol, and configured to
run at 7.2 kbps for the RD-LAP 9.6 protocol. EIA-232
connector, an 8-pin AUX jack, an 8-pin line jack, power switch,
fuse and cord. It is for domestic (U.S. or Canada) use.
MODEM SHELF FRU DLN1086 Adds an EIA standard shelf for installing one or two desktop
modems in a 19-inch equipment rack.
STACKING HARDWARE TRN7750 Adds a kit that permits the stacking of the base station
cabinets.
Table 4-18. Surge Protection Accessories for QUANTAR DBS
COF DESCRIPTION
ACCESS.
NUMBER
DESCRIPTION
SINGLE PHONE LINE
SUPPRESSOR
RRX4021 Adds a three electrode gas tube protector used for a single
telephone or dedicated local line
110/220 VAC SURGE
PROTECTOR
RRX4034 Adds a protector used for a single AC power line
DUAL PHONE LINE
SUPPRESSOR
TRN4589 Adds a three electrode gas tube protector used for dual
telephone or dedicated local lines