Specifications

4-20 800 MHz System Planner R4-11-4G
FIXED NETWORK EQUIPMENT
QUANTAR® Data Base Station Equipment
Table 4-16 shows a summary of the required options and descriptions for the
QUANTAR DBS.
Table 4-16. Required Options For QUANTAR DBS
ADD: 8’ OPEN RACK -
QUANTAR
X810 Adds an eight-foot open rack to hold the QUANTAR units. This is
used in place of a cabinet at the customer’s option.
ADD: 7’ OPEN RACK-
QUANTAR
X832 Adds a seven-foot open rack to hold the QUANTAR units. This is
used in place of a cabinet at the customer’s option.
ADD: 7.5’ OPEN RACK-
QUANTAR, 48RU
X882 Adds a seven-and-a-half foot open rack to hold the QUANTAR
units. This is used in place of a cabinet at the customer’s option.
Table 4-15. Software Options for QUANTAR DBS
COF DESCRIPTION
OPTION
NUMBER
DESCRIPTION
ENH: RD-LAP 19.2 AIR
PROTOCOL
X39 Adds software to the base station that enables it to transmit and
receive RD-LAP at 19.2 kbps. Station frequencies must use
25 kHz channel spacing. It is not compatible with 12.5 kHz
channel spacing. Either this option or X799 must be ordered.
DEL: WIRELINE,
QUANTAR/QUANTRO
STN
X84 Delete option (required) that removes wireline control support of
the base station.
ENH: RD-LAP 9.6 AIR
PROTOCOL
X799 Adds software to the base station that enables it to transmit and
receive RD-LAP at 9.6 kbps. Station frequencies must use
12.5 kHz channel spacing. Not compatible with 25 kHz channel
spacing. Either this option or X39 must be ordered.
Required
Options
Choice of
Required
Cabinet or Rack
Choice of
Required RF
Protocol (kbps)
Choice of
Required RF
Power Level
(watts)
X84 X52 A X39 (19.2) X250 Low (20-6)
X399 C Z153 X799 (9.6) X750 High
(100-20)
X180
X308
X741
X742
X743
X810
X832
X882
Table 4-14. Hardware Options for QUANTAR DBS (Continued)
COF DESCRIPTION
OPTION
NUMBER
DESCRIPTION