Specifications

4-18 800 MHz System Planner R4-11-4G
FIXED NETWORK EQUIPMENT
QUANTAR® Data Base Station Equipment
4.1.4 QUANTAR® Data Base Station Equipment
The QUANTAR Data Base Station is part of the family of Fixed Network
Equipment. This section describes the model, options and accessories for the
QUANTAR.
C99ED • QUANTAR/QUANTRO FAMILY
001C • QUANTAR/QUANTRO CONFIGURATION
The QUANTAR C99ED/001C is a 806-825 MHz synthesized field
programmable single channel radio. QUANTAR operation is full duplex
when ordered as specified with all five required options. The 20 watt or 100
watt station comes in a 30-inch cabinet, which is the minimum required.
A complete QUANTAR DBS configurations must include: X84 and 399 C,
and choices between cabinets or racks. In addition to these options, the
system designer should choose X39 or X799 for an RF protocol, and X250 or
X750 for an RF power level. X182 is not required, but is preferred, whenever
possible.
4.1.4.1 Options for the QUANTAR DBS
Tables 4-14 and 4-15 describe the hardware and software options for the
QUANTAR DBS.
Table 4-14. Hardware Options for QUANTAR DBS
COF DESCRIPTION
OPTION
NUMBER
DESCRIPTION
ADD: EMERG POWER,
BAT CHGR LP
X30 Adds automatic power revert and a battery charging power
supply (low power) to the base station. Included are three
cables, battery backup (TKN8732), battery temperature sensor
(TKN8786), 10-foot external battery (TRN5155), one power
supply (TPN6187 - 265 watt low power (25-6 watts RF) for
charging 12V DC external batteries), and hardware (TRN7998).
Batteries are not included.
ADD: EMERG POWER,
BAT CHGR HP
X30 Adds automatic power revert and a battery charging power
supply (high power) to the base station. Included are three
cables, battery backup (TKN8732), battery temperature sensor
(TKN8786), 10-foot external battery (TRN5155), one power
supply (TPN6185 - 625 watt high power (110-25 watts RF) for
charging 24V DC external batteries), and TRN7998 (hardware).
Batteries are not included.
ALT: CABINET, 30”,
15RU INDOOR
X 52 A Adds a 30-inch housing for the base station with 15 rack units.
This is the minimum size housing for a DBS.
ALT: DC ONLY
OPERATION (DC TO
DC)
X112 Adds a 24V Direct Current (DC) 600 watt DC-to-DC converter
instead of an AC power supply. Comes with a battery backup
cable (TKN8732) and a 10-foot external battery cable
(TRN5155). Required for high power stations operating from
batteries. A 24V DC battery or power source is required.