Specifications

4-16 800 MHz System Planner R4-11-4G
FIXED NETWORK EQUIPMENT
FullVision Integrated Network Manager
4.1.3.2 Accessories for FullVision INM
Table 4-13 shows the hardware accessory descriptions for FullVision INM.
Table 4-12. Software Options for FullVision INM
COF DESCRIPTION
OPTION
NUMBER
DESCRIPTION
FULLVISION
UPGRADE
SQM01SU
M0088
Required when ordering software options after the original order
has been placed or when ordering latest version of FullVision
software.
ENH: HEWLETT-
PACKARD OPEN
VIEW
ZA00244AA Adds upgrade license for upgrading to Private DataTAC 2.0.3
from Private DataTAC 2.0.2. This is for existing systems using
the C240 workstation only. The purchasing of a 4 GB external
hard drive is strongly recommended.
ENH: PRIVATE
DATATAC SYSTEM
* Adds required FullVision INM software upgrade, HP OpenView
software, and system specific (Private DataTAC) plug-in. For use
with single RNC.
ENH: WNG
INTERFACE
* Adds required software to support the WNG. Required for
systems with a WNG. Limit of one.
ENH: EACH
ADDITIONAL RNC
* Adds support for an additional active RNC. Limit of three.
ENH:
ALPHANUMERIC
PAGING SFWR
* Adds software to allow forwarding system alarms to
alphanumeric pager through selected paging service. CDN1545
is required.
ENH: SNMP TRAP
FORWARDING SFWR
* Forwards system alarms to a higher level of Managers-of-
Managers. CVN6142 is also required.
ENH: HP OV 250
NODE EXP
UPGRADE
Z898AC Adds HP OpenView 250 Node Expansion. For customers who
purchased the 250 Node Expansion for Private DataTAC 2.0.2
and wish to upgrade to Private DataTAC 2.0.3.
*See your local business manager for complete information on the types of packages offered.
Table 4-13. Hardware Accessories for FullVision INM
COF DESCRIPTION
ACCESS.
NUMBER
DESCRIPTION
ZONE MANAGER USER
TERMINAL 21 INCH
T5517 Adds an extra terminal for first or second user. CVN6142 is
also required.
COMPSHERE 3810PLUS
MODEM S/A V.32
L3186 Stand-alone modem with specific V.32 protocol configuration.
For U.S. customers that require CE marking and V.32 protocol.
QTY 1 7 FT 10BASE-T
ETHERNET
CDN6330 Adds four 7-foot 10BaseT ethernet cables, with RJ-45
connectors on both ends.
QTY 1 14 FT 20BASE T
ETHERNET CB
CDN6331 Adds a 14-foot 10BaseT ethernet cable, with RJ-45
connectors on both ends. A required ethernet cable connects
the TCP/IP ethernet to the FullVision INM. Used to connect the
color printer (CLN7242) to the FullVision INM.
21 INCH COLOR
MONITOR
CKN6323 Adds a 21-inch color graphics monitor and field replaceable
unit. Used as a second monitor or as a replacement.