Specifications

V.3229 / V.3229L <C#>-13
<Re
f
erence>
Operation
Remote configuration may be entered after dialing
by placing the remote configuration command
(%T=), without the = sign and followed by the secu-
rity code, at the end of the dial string.
SECURITY
OPERATION
Security operation provides password protection
against unauthorized dial-up access. The security
feature can be enabled / disabled with AT commands
when operating on a dial-up system.
Transmitted data and received data lines are sup-
pressed to the host DTE during security validation;
all other signals (CTS, DSR, RI, etc.) operate as
selected. After the password has been validated, the
modem operates normally.
Operating without
Security
The modem is not factory set for security and oper-
ates like a standard V.32, except for additional AT
command which allow access to security. With these
commands a user can set passwords and turn security
on. When security is enabled, a password must be
used to change security options.
Operating with
Security
A secure modem will not allow data transfer between
its host and a remote host until a correct password is
received from the calling party. If an incorrect pass-
word is received the secure modem disconnects. The
front panel is not locked out because this type of
security prevents unauthorized dial-up access.
Remote Operation
The originating modem must transmit the correct