Specifications

V.3229 / V.3229L <C#>-3
<Re
f
erence>
Operation
CD - lights when the received audio carrier signal is
detected or, if enabled, when error control negotia-
tion is complete. This signal is output on EIA-232
pin 8.
Received Data
RD - lights for a space at the receive data output,
indicating receive output data activity. This signal is
output on EIA-232 pin 3.
Transmit Data
TD - lights for a space at the transmit data input,
indicating transmit input data activity. This signal is
input on EIA-232 pin 2.
TALK / DATA
Only on the L model, the TALK / DATA LED lights
to indicate that the modem is in talk mode and goes
off to indicate that the modem is in data mode.
POWERUP
A powerup procedure is not required. Turn the ON/
OFF power switch on the rear panel to ON.
Quick Startup
Procedure
This procedure can help with first time operation of
the modem. The procedure assumes that phone
numbers have been inserted in memory, that an asyn-
chronous dial-up option set is in effect, that power,
DTE, and telephone line connections are made, and
that a similar, remote station is available for commu-
nication.
¥Make sure the modem is installed according to the
instructions in Chapter 2.