Specifications

<C#>

Introduction

<C#>-2 V.3229 / V.3229L

<Re

erence>

Introduction

Functional

The V.3229 processes serial asynchronous data from

a DTE at all standard rates from 300 bps to 57.6 kbps,

and serial synchronous data at rates from 1.2 to 14.4

kbps. Transmission can be over the dial-up telephone

network or 2- or 4-wire, point-to-point, dedicated

leased lines. The maximum telephone line speed is

14.4 kbps.

Built-in test features can determine system perfor-

mance and isolate faults in the data link.

Operation and configuration are controlled by either

the front panel LCD, the AT command set or V.25

command set. Changes can be made easily.

AutoConfiguration

AutoConfigure allows any of eleven option sets to be

quickly enabled or selected as the powerup configu-

ration. There are two ways to enable option sets: the

LCD and the AT command set. Refer to Chapter 3

and 5 respectively.

Appendix D lists the nine factory option sets. For

maximum versatility two additional options sets de-

signed by the user can also be stored for instant recall

or as the powerup configuration.

Remote configuration allows option changes to be

made to a remote unit.

Standard and L

Models

The modem is available in two models: standard and

the L model. The standard model has a 32 character

(liquid crystal display) LCD front panel with three

pushbuttons for option selection (Figure 1-1).

The L model has a TALK LED and TALK/DATA