Specifications

<C#>-H V.3229 / V.3229L
<Re
f
erence>
Command Index and Defaults
* factory default
Command Page S-Reg Description
\O 5-50 S60 Originate a reliable link
\Q 5-44 S54 Disable DTE flow control
\Q1 Enable DTE XON/XOFF flow control *
\Q2 Enable CTS flow control to the DTE
\Q3 Enables bilateral CTS/RTS flow control
\Q4 Disable DCE flow control
\Q5 Enable DCE XON/XOFF flow control *
\Q6 Enable CTS flow control to the DTE
\Q7 Enable CTS flow control to the DTE
\R 5-18 S60 Ring indicate, blinks for ring and remains
on for duration of call
\R1 Ring indicate, blinks for ring and turns
off when call is answered *
\T 5-48 S58 Disable inactivity timer *
\Tn Set inactivity timer to n (n=1-255 minutes)
\U 5-51 S60 Accept an MNP link
\V 5-43 S60 Disable protocol result codes *
\V1 Enable protocol result codes
\X 5-45 S54 No XON/XOFF characters to remote
DCE *
\X1 Pass XON/XOFF characters to remote
DCE
\Y 5-51 S60 Switch to MNP from normal mode
\Z 5-51 S60 Switch to normal from MNP mode
*AN 5-22 S34 Disables bilateral analog loop *
*AN1 Enables bilateral analog loop
*AUn 5-15 Dial number stored at location n upon
transition of DTR in command mode
(n=1-9) autodial number