Specifications

<C#>-D V.3229 / V.3229L
<Re
f
erence>
Command Index and Defaults
* factory default
Command Page S-Reg Description
&G 5-26 S23 No guard tone *
&G1 550 Hz tone
&G2 1800 Hz tone
&L 5-26 S27 Dial line *
&L1 S32 Leased line 2-wire
&L2 Leased line 4-wire
&M 5-26 S27 Async dial / async data *
&M1 Async dial / sync data
&M2 Dials stored number when DTR off / on
transition is detected / sync data
&M3 Manual dial / sync data
&M4 S30 V.25 bis autodialer with BISYNC
protocol / sync data
&M5 V.25 bis autodialer with SDLC protocol /
sync data
&P 5-28 S22 39/61 pulse make / break ratio *
&P1 33/67 pulse make / break ratio
&R 5-19 S21 CTS normal operating state
&R1 CTS forced on *
&R2 S72 CTS follows DCD
&R9 CTS equals RTS
&S 5-17 S21 DSR always on *
&S1 DSR on when ready to accept data
&S2 DSR off for 5 seconds after disconnect
&S3 DSR follows off hook (OH)
&T 5-21 Terminate current test
&T1 Initiate analog loopback
&T2 Initiate remote analog loopback
&T3 Initiate digital loopback
&T4 S23 Grant remote commanded digital
loopback*
&T5 S23 Denies remote commanded digital
loopback