Specifications

V.3229 / V.3229L <C#>-C
<Re
f
erence>
Command Index and Defaults
* factory default
Command Page S-Reg Description
X 5-7 S22 CONNECT (code 1), for all speeds,
no dial tone or busy signal detection
X1 Appropriate connect codes for rate,
no dial tone detection
X2 Wait for dial tone (appropriate
connect codes)
X3 Detect busy signal (appropriate connect
codes)
X4 Wait for dial tone, detect busy signal *
(appropriate connect codes)
Y 5-25 S21 Long space disconnect disabled
Y1 Long space disconnect enabled *
Z 5-36 Reset to user option set #1
Z1 Reset to user option set #2
&C 5-17 S21 DCD always on *
&C1 DCD on while carrier is present
&C2 DCD off 5 seconds after disconnect
&C3 DCD follows remote RTS
&D 5-18 S21 DTR ignored *
&D1 DTR recalls command mode
&D2 DTR disconnects
&D3 DTR disconnects and resets modem to
stored configuration
&F or &F1 5-35 Restore factory configuration 1 *
&F2 Restore factory configuration 2
&F3 Restore factory configuration 3
&F4 Restore factory configuration 4
&F5 Restore factory configuration 5
&F6 Restore factory configuration 6
&F7 Restore factory configuration 7
&F8 Restore factory configuration 8
&F9 Restore factory configuration 9