Specifications

V.3229 / V.3229L <C#>-3
3
Option Selection
Removing Cover
Warning: Disconnect ac power before removing the
cover. Although dangerous voltage levels are not
exposed, disconnecting power ensures an electrical
shock hazard is not present.
Place the unit on its side on a flat surface. To
disengage the lock prong insert a medium size flat
screwdriver blade in one of the bottom rear latch
slots. DO NOT PUSH the screwdriver but lightly pry
the handle away from the unit as illustrated in Figure
3-1. Assist removal by pushing the cover from the
chassis with your fingers on the unit rear edges.
Repeat this procedure with the remaining three latch
slots.