Specifications

V.3229 / V.3229L <C#>-1
3
Option Selection
Chapter 3
Option Selection
GENERAL
Note: This chapter contains the options available by
pushbutton in response to the LCD. Users of the L
model are encouraged to consult the different sec-
tions of this chapter as appropriate for further infor-
mation on modem operation and option selection.
Nine factory option sets provide complete setups for
most data communication arrangements. The mo-
dem is shipped configured to factory option set #1.
Appendix D lists the options for each set. Because
of the number of possible applications, most modems
require some option changes to fit the application.
Two user programmed option sets are also available.
These allow the user to configure customized option
sets and store them in memory for immediate recall
or as the powerup configuration.
The AutoConfigure feature, explained later in this
chapter, allows immediate use of any stored option
set.
STRAP OPTION
SELECTION
Modem configuration is controlled by front panel
pushbuttons and the LCD, AT or V.25 bis com-
mands, and hardware option straps located on the pc
board. Normally straps do not have to be changed.
If a change is required, remove the modem cover to
access the option straps.