Specifications

<C#>-10 V.3229 / V.3229L
7
V.25 bis Autodialer
Example: SIC;
Connect Incoming
Call
CIC
No parameters are required. If there is an incoming
call, the modem immediately answers the call. If no
call is incoming, the command is ignored.
Responses:
VAL
Valid command received. Transmitted on
receiving an error-free command with no
transmission error such as a parity error.
This confirmation is sent before the com-
mand is executed.
INVCU
Invalid command - command unknown.
Example: TIC
INVMS
Invalid command - message syntax error.
Example: SIC;
Redial Last
Number
CRR n
The CRR n command redials the last number a
maximum of n times. If no parameters are present,
the modem redials once. Also, the maximum number
of redials, the amount of time between redials, and
other parameters may vary depending on application
and national requirements if outside the U. S.