Specifications

<C#>-2 V.3229 / V.3229L

V.25 bis Autodialer

V.25 bis as described in the following text. Param-

eters are separated by semicolons.

For example:

PRN a;nnn...n

where a=the phone number ad-

dress in memory and nnn . . . n

= the phone number

The a and the nnn...n are both parameters.

Not all commands have parameters. For example the

CIC command has no parameter.

GUIDELINES

Use the following guidelines when working with

V.25 bis software:

¥An indicator enclosed in less than / greater than

signs < > represents a specific character in the appro-

priate character set, ASCII or EBCDIC.

<sp> - space

¥Each response below is considered an individual

message per V.25 bis conventions. A dial command

with intermediate call progress enabled (sync mode

ASCII/EBCDIC character set) is illustrated:

From DTE

To DTE

<sy><sy><stx>CNX<sp>@9600BPS

<etx>

¥Spaces in a command from the DTE are optional and

ignored.