Specifications

V.3229 / V.3229L <C#>-1
7
V.25 bis Autodiale
r
Chapter 7
V.25 bis Autodialer
GENERAL
V.25 bis is an option that allows dialing functions to
be controlled using synchronous data.
Select V.25 bis through the appropriate &M com-
mand in the AT command set (Chapter 5).
If using the LCD
¥Scroll through the menu to Main Menu 5, MODIFY
CONFIGURATION.
¥Advance to and enter the DTE PARAMETERS
submenu.
¥Select SYNC DATA.
¥Advance to DIAL METHOD.
¥Select either V.25 BISYNC DIALER or V.25
SDLC DIALER or V.25 ASYNC DIALER and then
select either ASCII or EBCDIC character format.
Note: The modem must be configured as V.25 SDLC
ASCII NRZ for use with an AS400 IBM computer.
Autodialer
Command Strings
and Parameters
Most command strings for the autodialer include two
parts: the command itself and the parameter(s) that
follow. For the purposes of this chapter, parameters
can be telephone numbers or anything appropriate to