Specifications

<C#>-8 V.3229 / V.3229L
6
Status Registers
The default value is 2 (seconds).
Pause forRingback
and Carrier
Detection / Wait for
2nd Dial Tone
S7=1-255
If no ringback is detected in the number of seconds
in S7 (1-255), the modem disconnects and sends the
NO CARRIER message or code. If ringback is
detected, the modem begins to look for a carrier.
If no carrier is detected within the number of seconds
in S7, the modem hangs up and sends the NO CAR-
RIER message or code.
Values between 1 and 255 may be used. The default
value is 30 (seconds).
Pause Interval for
Comma
S8=0-255
When a dial command contains a comma, the modem
pauses the number of seconds in S8.
Change S8 to change the basic pause interval (0-
255), or use several commas in a row for greater
delay during dialing.
The default value is 2 (seconds).
Carrier Detect Time
S9=0-255
S9 contains the amount of time (0-255) in 0.1 second
increments the carrier must be present to be recog-
nized. The default value is 6 (0.6 second). This timer
can be extended to lessen the likelihood of false
detection of carrier.