Specifications

<C#>-4 V.3229 / V.3229L
6
Status Registers
S-REGISTER
OPERATION
Enter ATSn? to read a register value, where n=reg-
ister number for a decimal value; or ATSn?^ for a
hexadecimal value.
For example, to determine the current backspace
character enter
ATS5?
The screen will show the ASCII value of the back-
space character stored in register S5.
Changing Register
Values
Sn=v
Sn=^v
To change an option using ATS commands requires
the operator to precalculate the revised decimal (or
hexadecimal) total. Because of the chance of miscal-
culating the bit sum, causing unplanned option
changes, writing to an S-register is discouraged. For
operators who prefer this method of option selection
a much simplified command that eliminates the dec-
imal calculation is explained in the Individual Bit
Command section.
Enter ATSn=v to change a register value, where
n=register number and v=decimal value; or
ATSn=^v,where ^v=hexadecimal value.
Note: Not all registers can be set by the ATSn=v (or
^v) command. Some registers are for reference only.