Specifications

<C#>-70 V.3229 / V.3229L
5
A
synchronous Operating Commands
Switch from
Normal to MNP
\Y
Entering \Y causes the modem to return online and
attempt an MNP link while connected in normal or
direct mode. The modem will initiate / accept a link
based on which mode, originate / answer, it was in
for the call. The remote modem must switch to MNP
mode for this command to succeed. The modem will
return to a normal connection if an MNP link is not
establishedin18seconds.
Switch from MNP to
Normal
\Z
This command causes the modem to return online
and switch from an MNP connection to a normal
connection.
Note: If \J1 and \C are set, the \Z command forces
the modem to the direct mode.
Note: The \Z and \Y commands must be issued at the
same time to both modems for the switch to occur.