Specifications

<C#>-68 V.3229 / V.3229L
5
A
synchronous Operating Commands
AT\B commands the local modem to send a break
signal to the remote modem. In all modes except
direct, S-register 79 determines the length of the
break sent to the DTE by the modem receiving a
break signal over the link. S79 may be set directly
or via AT\Bn where n=1-255 in 20 ms increments.
*default
V.42b Data
Compression
%C
Table 63:
Command Operation
\B Sends a break signal to the remote
modem. (Does not modify S79)
\Bn Sets S79 to length of break desired.
n=1-255 in 20 ms increments
@Z_TBL_E
ND = \C
DIMENSION(IN)
COL-
WIDTHS(1.
0000,2.710
8)
WIDTH(5.4992)
BE-
LOW(.0005)
HGUTTER(.0555)
VGUT-
TER(.0555)
BOX(Z_DOUBLE)
HGRID(Z_S
INGLE)
VGRID(Z_SINGLE)
KEEP(OFF) ALIGN(RT)
L2(R1C0..R
1C2)
TABLE HEADING
Command Operation
\C Disables auto reliable data buffer*
\C1 Buffer data for 4 seconds or 200
characters