Specifications

<C#>-66 V.3229 / V.3229L
5
A
synchronous Operating Commands
A break is received from the remote modem while
the modem is in connect state during a normal con-
nection.
A transmit break command is issued while the mo-
dem is in command state during a reliable or normal
connection.
Inactivity Timer
\T
\T specifies the number of minutes the modem will
stay online in a reliable mode without transmitting or
receiving data before hanging up. When the value is
set to 0, the timer is disabled. The timer is active only
Table 59:
Command Operation
\K, \K1 Empty the data buffers and send
break to the serial port
\K2, \K3 Immediately send break to the serial
port
\K4, \K5 Send a break to the serial port in se-
quence with any data received from
remote modem
Table 60:
Command Operation
\K, \K1 Empty the data buffers and send
break to the remote modem
\K2, \K3 Immediately send break to the remote
modem
\K4, \K5 Send a break to the remote modem in
sequence with any data received from
the serial port