Specifications

V.3229 / V.3229L <C#>-65
5
Asynchronous Operating Commands
Conditions under which breaks may occur are ex-
plained below with descriptions of the modem's re-
sponse under the different \K command break
options.
A break is sent to the serial port while the modem is
in connect state during a reliable or normal connec-
tion.
A break is sent to the serial port while the modem is
in connect state during a direct connection.
Table 57:
Command Operation
\K, \K2, \K4 Enter command mode but do not send
break to the remote modem
\K1 Empty the data buffers and send
break to the remote modem
\K3 Immediately send break to the remote
modem
\K5 Send break to the remote modem in
sequence with any data received from
the serial port
Table 58:
\K, \K2, \K4 Immediately send a break to the re-
mote mode and enter command state
when break is through
\K1, \K3, \K5 Immediately send a break to the re-
mote modem