Specifications

V.3229 / V.3229L <C#>-63
5
Asynchronous Operating Commands
*default
Data Link Flow
Control
\G
Enables or disables flow control used to pace data
sent from the remote modem to the local modem
during a normal connection. When AT\G1 is set,
the modem uses XON/XOFF to start / stop data
transmission from the remote modem. This com-
mand is ignored during a reliable connection.
*default
Break Control
\Kn
Use AT\Kn (n =0-5) to indicate the action taken
by the modem when a break is encountered.
Table 54:
Command Operation
\X Process but do not pass XON/XOFF
characters to remote DCE*
\X1 Process and pass XON/XOFF charac-
ters to remote DCE
Table 55:
Command Operation
\G Disable data link flow control*
\G1 Enable data link flow control