Specifications

V.3229 / V.3229L <C#>-61
5
Asynchronous Operating Commands
*default
XON/XOFF Pass
Through
\X
This option is active when flow control of the modem
by the DTE has been selected for XON/XOFF and
the connect mode is reliable or normal. It enables or
disables the sending of local flow control characters
(XON/XOFF) to the remote modem as well as being
acted on in the local modem. In reliable mode the
modem treats incoming XON/XOFF characters from
the remote modem as data characters. In normal
mode the modem will look at the \G command and
act accordingly.
Caution: With \X1 in effect local flow control
characters will be sent to the remote system. These
characters may turn on the data flow from the remote
system before the modem is ready to receive more
data, possibly resulting in data loss.
Table 53:
\Q Disable DTE flow control
\Q1 Enable DTE XON/XOFF flow control*
\Q2 Enable CTS flow control to the DTE
\Q3 Enable bilateral CTS/RTS flow control
\Q4 Disable DCE flow control
\Q5 Enable DCE XON/XOFF flow control*
\Q6 Enable CTS flow control to the DTE
\Q7 Enable CTS flow control to the DTE