Specifications

V.3229 / V.3229L <C#>-57
5
Asynchronous Operating Commands
CONNECT message for the new DTE speed at the
original rate. All subsequent data will be sent to the
DTE at the new DCE speed.
*default
V.42 Optional
Detection Phase
\M
This is a data sequence that speeds up the LAPM link
negotiation time if V.42 LAPM is supported by the
remote modem.
*default
Operating Mode
\N
Sets the error control mode that the modem uses
while in data mode. An AT\Nn command issued
during online command mode will not affect the
current connection but will be acted on for subse-
quent connections. LAPM or MNP protocol opera-
tion is referred to as reliable mode, and the auto-
Table 48:
Command Operation
\J Disable slaved DTE/DCE (constant
speed DTE on)*
\J1 Enable slaved DTE/DCE (constant
speed DTE off)
Table 49:
Command Operation
\M Disable V.42 fast detect phase
\M1 Enable V.42 fast detect phase*