Specifications

<C#>

Introduction

V.3229 / V.3229L <C#>-5

<Re

erence>

Installation

Programmable mode corrects for the signal level loss

between the modem and the telephone company

central office. This is done by setting the modem

transmit output signal level with a resistor selected

and installed in the jack by the telephone company.

This allows the output signal to reach the central

office at the optimum level of -12 dBm. Jack ar-

rangements for this mode are the RJ45S (Program-

mable) and RJ41S (Universal). The RJ41S has a

switch option that must be selected to Programmed

(P). Cable PN 61020192-0301 (not supplied with

modem) is used to connect the DIAL jack to the

RJ41S or RJ45S wall jack.