Specifications

<C#>-52 V.3229 / V.3229L
5
A
synchronous Operating Commands
mote configuration mode. This code is separate from
DTE security passwords, which are discussed under
Security in the next section. The security code is user
programmable and can be set to any value from a
single 0 to any combination up to 99999999 using
the AT%P=<desired code> command.
Example: If the remote modem security code is
12345, then the local modem must include this code
in the initialization string before the remote modem
responds.
*default
The %P=D command disables remote configuration.
To enable remote configuration, insert another secu-
rity code.
Entering Remote
Configuration
%T=
This mode of operation allows the modem user to
view or modify the option set of a compatible remote
modem. Entering AT%T= (security code of remote)
initiates remote configuration.
The modem is shipped from the factory with security
Table 45:
Command Operation
%P= Sets security code to a value 0 to
99999999 entered after the equal sign
%P? Request local security code to be dis-
played
%P=D Access for remote configuration is not
possible when security code is dis-
abled
%P=<blank
>
Clears security code*