Specifications

V.3229 / V.3229L <C#>-49

Asynchronous Operating Commands

&V allows the user to view the current configuration

profile in the form of S-register values. &V1 displays

the received signal parameters or characteristics.

Storing a

Telephone

Command Line

*CN, x

*ND

Nine stored phone number locations of up to 31

characters each are available in nonvolatile memory.

Normally, one phone number per location is accom-

modated. However, a phone number longer than 31

characters can overflow into the next location. Any

spaces remaining in the overflowed location cannot

be used for another number. The stored phone num-

ber is retained until replaced by another number.

Modem power can be turned off without affecting

stored information.

Two commands can store phone numbers:

¥AT&Z inserts a phone number in location one only.

¥AT*CN inserts a phone number in locations one

through nine.

To store a telephone command line in location one

enter

AT&Z

Table 43:

Command Operation

&V Displays configuration profiles

&V1 Display received signal characteris-

tics

Protoco

omman

ont.